How to Knot a Tie – 5 Easy Ways

Most people find it difficult in knotting a tie; so, you will always get the question like how to knot a tie on the internet. There are different ways of knotting a tie and this method represents a particular idea or lifestyle, people, or place. We wear clothes for different occasions and reasons, same with knotting of ties. Different methods for different shirt collars and necks. There are tie knots for tall guys, short guys, big guys, and skinny guys, you have to be careful not to wear the wrong one that won’t fit your event or body size.

Try different ties and styles, don’t stick to a method or a particular tie all your life. it is okay to explore different styles of tie and also know how to knot them.

In this article you will be learning 5 easy ways to tie a necktie, so you will be able to tie all the best tie knots  from the starting  fastest and easiest tie knot, the Simple or Oriental Knot

The simple oriental style

This is actually a step by step method on how to knot a tie; Here are the steps on how to knot a simple oriental style;

1. Drape the tie around your collar with the seam facing inward and the thick end on your left, two or three inches lower than your desired finishing position.
2. Bring the thick end horizontally across the front of the narrow end, and then pass it back horizontally behind the narrow end.
3. Pass the thick end again across the front of the knot from left to right.
4. Now pass the thick end again behind the knot horizontally from right to left.
5. Pass the thick end AGAIN across the front of the knot from left to right. Slip a finger under this third horizontal loop.
6. Bring the tip of the thick end up underneath the loop around your collar and feed it up behind the knot, down over the front of the knot, and through that third horizontal loop.
7. Pull the thick end through the horizontal loop and snug it does
8. Adjust the tie by holding the knot in one hand and pulling gently on the narrow end with the other.

Step 1: Four In Hand Knot

Here are the steps on how to knot a Hand knot.

1. Loop the tie around your collar. Thick end on the left, 3-4 inches lower than the thin end.
2. Cross the thick end in front of the thin end.
3. Wrap the thick end around behind the thin end and cross horizontally from right to left.
4. Bring the thick end horizontally across the front of the knot from right to left. Slip a finger beneath this horizontal band.
5. Turn the tip of the thick end upward and in, sliding it beneath the loop around your neck.
6. Feed the thick end down through the loop you’ve held open with your finger.
7. Pull the thick end all the way through the loop and snug the knot down tightly.
8. Tighten the knot by holding it gently in one hand and tugging on the thin end with the other.

The four in hand knot is one of the most famous necktie knots for starters who are just getting to know how to how to knot a tie. It is easy to learn and also one of the oldest.

Step 2: Half Windsor Knot

Here are the steps on how to knot a half Windsor knot;

1. Drape the necktie around your collar with the wide end on your right hanging down to your thigh and the thin end on the left at about your rib cage.
2. Cross the wide end in front of the thin end from right to left, making an X-shape below your chin.
3. Loop the wide end of the tie horizontally around and behind the thin end.
4. Take the wide end over from the top and through the opening of the X and pull tight.
5. Hold the wide end with your right hand and wrap it in front over the thin end, from your right to your left.
6. Keeping the triangle intact with your left hand, bring the wide end towards your chest and from behind the loop, pass it over the X.
7. Using the index finger of your left hand, open up the triangle that has now formed over the X and pull the wide end all the way through.
8. To adjust the length, pull the knot up towards your collar while pulling the thin end of the tie-down. You may need to adjust the horizontal loop to make sure it’s flat and even

The Half Windsor is most suited for guys who just started learning how to knot a tie. The length is small and they could easily find their way around it. It is perfect for really tall guys with broad shoulders.

Step 3: Full Windsor Knot

Here are the steps on how to knot a full Windsor knot;

1. Drape the necktie around your collar with the wide end on the right hanging 4-6 inches lower than your waistband.
2. Cross the wide end horizontally in front of the slim end, making an X-shape just below your chin.
3. Tuck the wide end up and beneath the loop around your neck, coming out point-upward behind the X. Use one finger to hold the X in place.
4. Pull the wide end all the way down.
5. Bring the wide end around behind the knot and pass it horizontally from right to left.
6. Flip the wide end tip upward and tug it diagonally across the front of the knot.
7. Loop the wide end over the top of the loop around your collar and bring it back down. It should emerge on the left of the thin end.
8. Bring the wide end horizontally across the front of the knot, from left to right. This forms a horizontal band. Tuck a finger through it and hold it in place.
9. Bring the wide end underneath the loop one more time, around the collar with the tip aiming upward.
10. Turn the wide end downward and slide the tip through the horizontal loop you saved with your finger in step 8.
11. Pull the wide end all the way down and smooth out any creases or slack in the knot.

The next step is the Nicky Knot, it is quite simple; All you have to do is Cross the thick end underneath the thin end, making an X-shape below your chin. Flip the thick end up in front of the loop around your collar… see how to knot the Nicky knot below.

Step 4. Nicky Knot

Here are the steps on how to knot a Nicky knot;

1. Drape the necktie around your collar with the seam outward and the thick end on your left, about two inches lower than you want the finished position.
2. Cross the thick end underneath the thin end, making an X-shape below your chin.
3. Flip the thick end up in front of the loop around your collar, then tuck it down through the loop, emerging to the left of the thin end.
4. Bring the tip of the thick end horizontally across the front of the knot. Slip a finger underneath the horizontal band you’ve just created across the front of the knot.
5. Bring the tip of the thick end up and underneath the loop around your collar.
6. Tuck the tip of the thick end down through the horizontal loop you created in Step 4.
7. Pull the thick end all the way through the horizontal loop and snug it down.
8. Adjust the knot as needed by holding it with one hand and pulling on the narrow end of the tie with the other.

The last step on how to knot a tie is the Bow tie knot, Many people make use this to attend occasions like wedding, meetings, and etc., it will be sad attending that event with knotting your tie properly because you do not know how to knot a bow tie.

Step 5: Bow Tie Knot

Here are the steps on how to knot a bow tie;

1. Start with the bow tie draped around your neck with the seams facing down and the right side longer than the left.
2. Place the right end over the left end, making an X-shape just below the chin.
3. Loop the longer end behind the ‘X’ to create a simple knot similar to the first knot while tying shoelaces. Pull tight and leave the longer end resting on your shoulder.
4. Placing your index finger on the widest part of the curve of the shorter end, fold it to create a bow shape. Place the folded tip across your collar with the shorter end as close to your neck as possible.
5. Holding the bow created above with the forefinger and thumb of your left hand, bring the longer end straight down over the shorter end in the middle of the bow.
6. Using your right hand, fold the longer end back towards the chest, pinch the fold and double the tip over to make a wing.
7. Tuck the folded tip of the longer end behind the folded tip of the shorter end and through the small loop, you formed when you first passed it up behind the knot.
8. With the wings in place, tug the loops behind them to tighten the vertical front knot.
9. Hold the front of the knot down with one finger, and wriggle the wings until they’re symmetrical.
10. Make final adjustments. Ensure your bow tie lies flat and horizontal against your collarbone. You’re done! Now you know how to tie a tie AND how to tie a bow tie. And boom, you did it you know how to knot a tie now.

And yes, these are the best 5 steps on how to knot a tie, you should try these methods. You don’t have to be confuse about how to knot a tie or what tie suits you or when to wear which just try out this simple methods of knotting ties.